Johnny - You Need Me, I Don't Need You [Pedal cover]

SUBWOOFERS ON!! Here is the Cover of "You Need Me, I Don't Need You".
Feel free to share this video. Would greatly appreciate it.
Happy listening 

 

Subscribe for more Froot TV!
http://www.youtube.com/subscription_c...

Like our FACEBOOK page
http://www.facebook.com/froottv

Follow us on TWITTER
https://twitter.com/FrootTV

Audio & Video Produced by Froot TV
Filmed at Froot TV Studios

Give a Hope

This is my 2nd video from Youtube channel Froot TV

click here to watch it
Click here to Like our Facebook Page

"GIVE A HOPE"  was a social initiative by the fledgling Vizag based youth group "Yes We Can". We have mobilized youth and organized a street show along the beach, at YMCA involving Dance, Magic and Music. 

The funds that were collected at the event were used to enrich the lives of hard-working daily wage laborers. The recipients of the money were carefully observed and selected by the team members. Here are some of their responses, the joy we had in seeing them smile, and the issues that motivated us to start Give A Hope in the first place.

All the Dramatic Shots are True Incidents and shot without knowing the presence of the Camera 

Thanks to our team for making it successful

Sashmith Mohan, Ragh Sai, Dhanwanth, Sirish Pakki, Priya, Arudra, Vineet Doki , Koushik, Zerub Roberts, Neelima, Teja Tribhuvan, Stephen Anurag P, Navya Rao 

Directed by: Nitish John & Alpha — https://www.facebook.com/FrootTv

Executive Producers: Nitish John & Alpha

Screenplay by: Nitish John & Alpha

Camera:

Sirish Pakki — https://www.facebook.com/profile.php?...

Dhanwanth — https://www.facebook.com/dhanwanthmup...

Koushik — https://www.facebook.com/koushik.redd...

Alpha 

Cast:

John

Koushik 

Zerub — https://www.facebook.com/zerub.robert...

Neelima — https://www.facebook.com/neels2789

Manikrishna — https://www.facebook.com/mallipudiman...

Kamal Dronam — https://www.facebook.com/kamal.dronam...

Editing: Alpha

Sound Mixing: Nitish John

Art: Vineet Doki — https://www.facebook.com/vineet.red?f...

Technical Advisor: Krishna K

Subscribe, Like, Comment and Share

This is my new youtube channel

FROOT TV

Subscribe, Like, Comment and Share

click to see the fun

Boom Boom Bazooka

Its All Boom Boom fun watch like and comment

Friendship day Special

Tv antenna from coat hanger

Rabbit ears are for rabbits, not digital televisions.
In this project, I’ll show you how to build your
own digital TV antenna from wire hangers, a piece
of wood and some pipe.

A simple flying blimp

Do you love Helium ballons , if so do u like them to do air voyage lets try this ballon blimp that flots to keep fun

Unusual uses of Butter

Are you bored of eating butter lets try something else , what a butter can do

Unusual uses of Tennis balls

What more can you make out of a worn tennis ball which cannot be further used for playing  you may end  it in garbage or give it to your dog but there are several amazing ways it can be used and these are few of them:

How to bring life to dead sea urchins

Last week we came across these tiny sea urchin shells at a beach shop, thin and light as eggshells. What to do with them? Light them up with LEDs, of course!

                                        
We've seen sea urchin lamps before, but they've always been made with large (i.e., sturdy) and colorful ones. In contrast, these tiny ones might be better to hang around christmas lights like little paper lanterns.

Just a throwie sans magnet (Urchie?), tucked into the shell. Each one has a hole in the bottom large enough to fit a pretty good size LED, although not necessarily the battery as well.

 The natural beauty and structure of these shells is amazing; they must have been even more beautiful when they were alive.

How to make a fingerless glove using old socks

 

I Hope we all like a stylish fingerless glove, it looks fashion and fun to wear on a bike ride, boxing and on winter so lets try to make one from household scrap , but all u should have is time , a sewing machine if u know to sew or a good sewer who can sew for u and a good shade of socks

Step 1

Cut the toe section off of the socks. Depending on the length of the stockings, you may have enough for 2 pair as

  

Step 2

Using a straight stitch on sewing machine, sew a backwards check mark through both layers. sew a little more than 2" on the long side -- you can use your own hand to determine exactly how long you want that seam.


Tip: if you're using dark socks, and you want to mark  your stitch line before sewing, a sliver of dry soap makes a great marking tool.

Step 3

Cut just outside the seam you just sewed, and then cut off the top of the thumb.


I wanted a more rustic look, so I sewed the outside, leaving the seam visible. If you would like to hide the seam, turn the stocking inside out to sew.

Step 4

While stretch knits won't ravel if left unfinished,  and bottom edges with a simple overcast stitch on  sewing machine. 

And if u spare some good time u can make a good one

The Origami flower

     Are you bored of Hard ware science? then lets try this soft paper science

I'm going to show you how to make origami ball, made from blossoms.

Step 1Materials

You need:

• post-it notes
• double sided tape or glue
• scissors (for the tape)
• and some time 

Step 2Folding

Take one post-it note and fold it in half to make a triangle (picture 1). Fold the dash line to make a diamond (picture 2). Return the left part in the previous position (picture 3). Fold the right part in half (picture 4). Make the same with the left part (picture 5). Then fold the whole model in half (picture 6). Fold in half again like in picture 7, but this time put the smaller triangle under the bigger (see picture 8 for the result). Fold in the dash line and again put the smaller triangle inside (picture 9). The model is ready.

Now make another 4 leaves in the same way.

Video

Step 3Connect the leaves

Now let's connect the leaves from the previous step to make a blossom.

Cut a piece from the double-sided tape and place it like is shown in the picture below. Then stick another model. The second picture is more detailed....Connect the other pieces the same way.

Press the corners a little for more realistic effect (pictures 3 & 4).

Make another 11 blossoms like this one.

Step 4Connect the blossoms

Take 3 blossoms and stick them together. See the pictures below. Continue to add blossoms until they become 6. Now you should have haft of the ball ready. The same way make the other half.

Step 5Ready

The flower origami ball is ready!

How to make a Super charge electric Air plane

Hi guys do u wish to send a paper plane more than 100 feet, then just follow this

The single-sheet paper airplanes you made when you were a kid (or perhaps last week in your cubicle) were, well, kid stuff compared to this beefed-up paper craft, which uses an electric motor from an old pager or toy powered by a big electrolytic capacitor. Known as a "Gold Cap" and made by Panasonic, the capacitor charges from a battery pack and then metes out a steady flow of power to keep your propeller whirring for about 10 seconds-just long enough to send the flyer airborne and carry it between 30 and 100 feet. (You can also add a gearing system to squeeze out even more flight time.) We've created plans for an eAT-6 "Texan" airplane and put them here and here to get you started. Just think twice before blindly launching this one soaring over the wall of your cube.

Build a Motorized Paper Airplane
Cost: $14.29

Time: 3

Hours

Easy | | | | |

Hard

Things Needed :

• Paper eAT-6 plan (free; here and here)
• Two 9x12-in. sheets smooth Bienfang Bristol Board (19 cents ea.; dickblick.com)
• T-6 Texan Vacu Canopy ($2.96; squadron.com; #SQ9523)
• Panasonic 2.5-volt 3.3F Gold Cap ($5.22; digikey.com; #P6966-ND)
• Small electric motor (free; salvaged)
• Plastic propeller (57 cents; towerhobbies.com; #LXHHV9)
• AA four-battery holder (90 cents; digikey.com; #BH24AAW-ND)
• Two header pins (27 cents; jameco.com; #103185-3)
• Four AA batteries ($3.99)
• Or you can find these above stuff  at your near by electrical hard ware store

STEP1 : PRINT THE PARTS

Download the eAT-6 plan PDF here and here and print each sheet on a separate piece of Bristol Board, or any thick paper that works in your printer.

STEP 2 : ASSEMBLE THE BODY

Carefully bend and glue the fuselage and wings into shape. Add the cowling and elevator, and glue the wings in place. Decorate it with decals or markers.

STEP 3 : MOTORIZE IT

Solder the Gold Cap to the motor, and solder two three-inch wires to the Gold Cap terminals on one end and header pins on the other. Slide the power system into the plane, and route the header pins out of the tail. (The capacitor should sit near the rear of the cockpit.) Glue the engine-nose disk to the front of the cowling, and add the cowling trim ring. Affix the plastic propeller to the electric motor's shaft.

STEP 4 : FUEL UP

Carefully bend each wing so it's angled up slightly. Install the AA batteries into a battery holder, and connect it to the header pins sticking out of the plane to juice the capacitor. Charge the plane until the motor is spinning at its maximum rpm, and disconnect it.

STEP 5 : FLY AWAY

Hold the plane and point it into the wind. Launch using a flinging motion with your arm, not your wrist. The plane will fly in a left-hand circle, the diameter of which depends on the amount of deflection that you bend into the rudder [see plans: 1, 2]. Bend the elevator slightly upward to make it climb.

Awesome MOD for Walk Along Glider

This topic is related to an Earlier post " How to make a Walkalong Glider ".

Hi guys i think u have seen my earlier post " How to make a Walkalong Glider ", today iam presenting you with an awesome mod to power ur glider

you need a extra of the following things (  It is Not tough if you can find these things) :

 

1. Old picooz rc helicopter's broken tail part 

                          or

     A small Pager motor or vibrator which u may  get for free of cost  in some    

     mobile repair shops

2. 3volts lithium "button battery''

3. Small propeller

                         or

     just follow this  "   http://www.instructables.com/id/mini-airplane/  "

     to make a cheap best propeller from old can

STEP 1:

 Just draw a red line on the glider as shown in the figure (just click on the image to zoom)

STEP 2:

Now make the power booster to the glider by connecting the battery, motor and propellor as shown in the figure , you can also modify little by adding a switch

STEP 3:

Now  just simply attach the power booster to the glider along the red line depending upon the balance point or CG(centre of gravity) of the glider after several test trials as shown in the figure

 Now just rock  the glider with ultimate fun but be careful  the glider may go far away from u leaving fun.

Candle powered hot air balloon

Build a candle powered hot air balloon using painter's plastic, balsa wood, and birthday candles.

Step 1

Cut the plastic and heat-seal the edges. 

Layout your materials on a large sheet cardboard. 

Pull out approximately 6 feet of the painter's plastic and cut it forming a sheet 9 x 6 ft. It's important to have plastic that is 1/2 mil (12 microns) or thinner. Thicker plastic is too heavy to fly. 

Fold the sheet in half along the 9 ft side forming a two-ply sheet 4.5 x 6 ft. Use a hot knife to seal the two 4.5 ft edges. An electric hot knife makes this really easy, but it can also be done with an old metal knife heated over a flame. 

Check your edges and correct any large holes. A few small holes won't cause problems.

Step 2

Melt candles together and attach them to balsa. Again, an electric hot knife makes this step a breeze. A heated fork can achieve the same results. Make sure to do both sides. 

Once the candles are attached together, melt them to the middle of a piece of balsa wood 3/16 x 1/8 x 36 inches.

Step 3

Assemble the balsa frame.

Make an "H" with the 36 in balsa and candle piece and two 3/16 x 1/8 x 30 in balsa sticks. Make the joints with a small piece of clear tape.

Step 4

Tape the balloon to the balsa frame.

Step 5

Use a stick inside the balloon to hold the plastic away from the candles and light them. Keep holding the plastic up until enough hot air has filled the balloon to inflate it.

Step 6

It's an amazing feeling when your creation first gets lift and starts to take off. 

At this stage, there's about ten thousand things that could go wrong. Carefully think everything through before you actually do it. 

I tied some thread to mine so I could fly it inside our warehouse without it getting away and setting the place on fire. 

It will drip a lot of hot wax, so keep it over the cardboard if possible. Also, if you let the candles burn all the way down, the balsa will catch on fire. I am currently experimenting with other types of candles to prevent this. 

Fly safe!